Assigning Inputs To Stereo Tracks (Tracks 3 And 4 Only) - Tascam DP-006 Owner's Manual

Assigning inputs to stereo tracks (Tracks 3 and 4
only)
1. On the TRACK TYPE screen, set TRACK 3 and/or TRACK 4 to
STEREO . (See "Setting the track type (Tracks 3 and 4 only)" on page 54.)
When the recorder is stopped, press the ASSIGN button to open the
2.
INPUT ASSIGN screen.
Use the F3 [5] button and F4 [b] buttons to select (highlight) the
3.
setting value for TRACK 3 or TRACK 4 .
Use the DATA wheel to set the input source of the TRACK 3 or TRACK
4.
4 stereo track.
Setting values: IN A-A , IN A-B (default value), IN B-A , IN B-B
5. After making the setting, press the HOME button to return to the Home
Screen.
NOTE
Both left and right channels of stereo tracks (TRACK 3 and/or TRACK 4)
will be recorded to at the same time. Recording to just the left or just the
right channel is not possible.
TIP
You can record to track 1 and track 2 separately and then clone (copy)
them together as a stereo pair to the left and right channels of track 3 or
4. In this way, you can record their left and right channels separately. (See
"CLONE TRACK (track duplication)" on page 69.)
6 – Basic Recording
TASCAM DP-006
55