How do I reset the wireless receiver?
• Insert a straightened paperclip into the reset hole on the
bottom of the receiver to press the reset button. When this
button is pressed, the wireless receiver is reset and goes into
pairing mode. Reset should only be used when a connection
between the wireless receiver and wireless transmitter
cannot be made.
LED Indicator Questions
What does the LED indicator on the wireless
transmitter mean?
• The LED is solid blue when the transmitter is connected to
(paired) the receiver.
• The LED blinks blue when the wireless transmitter is turned
on.
What do the LED indicators on the wireless receiver
mean?
• The MUTE LED is orange when the Mute button on the
wireless receiver has been pressed.
• The MUTE LED is red when the mute button (the Rocketfish
logo) on the left side of the headset has been pressed.
• The MUTE LED is off when the headset is not muted.
• The PWR LED blinks blue when connected to (paired) the
transmitter.
• The SRS LED lights blue when SRS mode is activated.
48