Samson Graphite 25 Owner's Manual page 25

Graphite 25 · USB/MIDI Keyboard Controller
Performance Controls
Transport Buttons
There are five transport buttons marked
Rewind, Fast Forward, Stop, Play, and Record, respectively. Please see detailed information for the
default settings in the table below.
Component Category
Transport
Button
The function of each button is assignable. You can change parameters or assign other controls to
these buttons through the setup function. Please refer to "Setup Mode" on page 17 for details.
During performance, if a note is stuck on, press the
multaneously, and the unit will send Panic command to all ports and channels of external sound,
causing the device to terminate the sound. The Panic command includes "all notes off, " "reset all
controllers, " "reset pitch bend" and "reset GM" system messages. During the panic processing,
"PANIC" will appear in the Operation area of the display.
Note: Not all sound generating devices support this Panic command.
Description Port Message
Rewind - CC: 116, Ch -
Fast Forward - CC: 117, Ch -
Stop - CC: 118, Ch -
Play - CC: 119, Ch -
Record - CC: 114, Ch -
. The factory default settings are to
Transmitted Data (H)
B0 74 7F/00
B0 75 7F/00
B0 76 7F/00
B0 77 7F/00
B0 72 7F/00
(Rewind) and (Fast Forward) buttons si-
Type Mode
Ctrl Toggle
Ctrl Toggle
Ctrl Toggle
Ctrl Toggle
Ctrl Toggle
25