Defining Enable Password - Dell PowerConnect 3324 User Manual

1. Open the Line Password page.
2. Define the Line Password for Secure Telnet field.
3. Click Apply Changes. The line password for Secure Telnet sessions is defined, and the device is updated.
Assigning Line Passwords Using CLI Commands
The following table summarizes the equivalent CLI commands for viewing fields displayed in the Line Password page.
CLI Command
password password [encrypted] Specifies a password on a line.
The following is an example of the CLI commands:
Console (config-line)# password dell

Defining Enable Password

The Modify Enable Password page sets a local password to control access to Normal, Privilege, and Global Configuration. To open the Modify Enable
Password page.
Click System > Management Security > Enable Passwords in the Tree View. The Modify Enable Password page opens.
l
Modify Enable Password Page
Description