Adding Bridge Multicast Group Members - Dell PowerConnect 3324 User Manual

CLI Command Description
bridge multicast filtering Enables filtering of multicast addresses.
ip igmp snooping Enables Internet Group Management Protocol (IGMP) snooping.
The following is an example of the CLI commands:
Console (config)# bridge multicast filtering
Console (config)# ip igmp snooping

Adding Bridge Multicast Group Members

The Bridge Multicast Group page displays the ports and LAGs attached to the multicast service group in the Port and LAG Table. The Port and LAG tables
also reflect the manner in which the port or LAGs joined the multicast group. Ports can be added either to existing groups or to new multicast service groups.
The Bridge Multicast Group page permits new multicast service groups to be created. The Bridge Multicast Group page also assigns ports to a specific
multicast service address group. To open the Bridge Multicast Group page:
Click Switch > Multicast Support > Bridge Multicast Group in the Tree View. The Bridge Multicast Group page opens.
l
Bridge Multicast Group Page
The Bridge Multicast Group page contains the following fields:
VLAN ID—Identifies a VLAN.
l
Bridge Multicast Address—Identifies the multicast group IP address.
l