Location Of Controls - Toshiba 19DV665DB Owner's Manual

Location of controls

Disc slot
C.I. slot
Adjusting the screen angle
You can adjust the angle of the TV-screen
for 2º forward or for 10º backward from
vertical angle. Hold the base of the TV
while adjusting the angle.
Applicable to the following models:
19DV665DB, 19DV667DB, 22DV665DB,
22DV667DB
Description of indicators and controls
1. Remote sensor
POWER indicator: The Power indicator lights up red in standby mode, orange in standby mode when the timer is
2.
activated, and green when TV is powered on.
3. Loudspeakers
EJECT button: Ejects a disc.
4.
- buttons: Adjust the volume level. In Menu: Setting.
/
5. VOLUME +
6. PLAY button/ CHANNEL
In DVD mode: Playback. In Menu: Setting. In Standby mode: Turns the TV on.
button/
7. STOP CHANNEL
In DVD mode: Stop. In Menu: Setting. In Standby mode: Turns the TV on.
MENU button: Displays the Main Menu screen.
8.
INPUT/ENTER button: Select video input source. In Menu: Use as an ENTER button to confirm selection.
9.
TV button: Preparation: Connect the power cable to 230V/50Hz AC outlet.
10.
a) If standby-LED is red, you may turn-off. To turn-off, press TV button 1x and release.
For confirmation, standby-LED will turn off.
b) If standby-LED is off, you may turn-on. To turn-on, press TV button 1x and release.
For confirmation, standby-LED will change to red and about 1 second later to green.
c) If the TV is currently working, press TV button 1x and release to turn-off.
For confirmation, standby-LED will turn off.
In TV-off-condition, the unit cannot be power-on by pressing
In TV-off-condition, the TV's power-consumption is approx. 1 Watt.
If total disconnection from the mains power is required, please unplug the mains lead.
6
4
5
6
7
8
9
10
1 2
button: Press to change to a higher numbered channel set into memory.
button: Press to change to a lower numbered channel set into memory.
on the remote control.
3