Table of Contents
Advertisement
1
Auto 4:3 Default*
2
Display Setup*
Auto Shut Off
3
AV Colour*
Rec Screen Status
Reset
I
*1
n TV mode, Auto 4:3 Default is only available when the Picture Size is set to Auto.
In Component mode, Auto 4:3 Default is only available when there is a 480i/576i signal.
*2
Timer Setting option can be configured only when the TV tuner input is set to DTV mode.
The Password Setup and Display Setup option can be configured only when the TV tuner input is set to DTV mode.
*3
PAL60 is the colour system used in Germany; NTSC3.58 is used in the U.S. If the picture shows horizontal stripes, set this option to Auto.
Other convenience functions
4:3/16:9
No Signal
No Operation
Auto/
PAL/
SECAM/
NTSC4.43/
NTSC3.58/
PAL60
On/Off
Select the default picture size for a 4:3 picture. This picture can either be
displayed in its original 4:3 format or expanded to 16:9 proportions.
See page 43.
This option automatically shuts the TV off when no signal has been
detected for 15 minutes (not applicable to DVD mode), or no button has
been pressed for 4 hours.
Select the colour system for the display when using signal from the audio/
video terminals. See page 28.
This function is used in conjunction with the Timer function included as
part of the Digital EPG. It determines whether the TV screen switches on
or not when a programmed Timer setting begins. See page 51 for further
details.
Reset all TV settings to their factory preset values. Once the TV reset
process has been completed, the TV will automatically turn off. Press
on the remote control to turn it back on.
(continued)
31
Advertisement
Table of Contents
