Table of Contents
Advertisement
Basic operations
To project the picture
4
3
5
1
Turn the MAIN POWER switch of the projector on.[ I : ON]
• The ON indicator will light up orange.
2
Press the STANDBY/ON button.
• The ON indicator blinks (green) during warm-up and then lights (green).
• Power cannot be turned on even if the STANDBY/ON button is pressed within 60 seconds after
power is turned off, since the lamp has cooled preparing for next lighting.
3
Remove the lens cap.
4
Adjust picture size using the projection lens ZOOM knob.
5
Adjust focus using the projection lens FOCUS ring.
6
Power on all connected equipment.
The method of connecting various equipment, see on the page 20~28.
7
Press the INPUT button or the INPUT SELECT (VIDEO or
RGB) button to select the source of the signal to be projected
on the screen.
• The selected signal input is displayed at the bottom right of the screen
for 3 seconds.
2
1
2
7
7
Example on-screen display
13
Advertisement
Table of Contents
