Table of Contents
Advertisement
Adjustments and functions (continued)
The menu SET UP serves for the change of parameters influencing the picture and for
SET UP
the move picture position.
RGB signal input
Adjustment Item
VOLUME
BRIGHT
(BRIGHTNESS)
CONTRAST
SHARPNESS
COLOR
TINT
V.POSIT
(V.POSITION)
H.POSIT
(H.POSITION)
H.PHASE
H.SIZE
COLOR BAL
(COLOR BALANCE)
How to use the SET UP menu
1. Bar display items (VOLUME, BRIGHT etc.)
Move the green cursor to the item you wish to adjust, then move the MENU buttons on the unit, or the
DISK PAD, to left and right to adjust the length of the bar display. Some items can not be adjusted
during freeze or during magnify. (Please refer to the above table.)
2. Numerical display items (V POSIT, H POSIT etc.)
Use either manual operation or auto-adjustment. Some items can not be adjusted during freeze or
during magnify. (Please refer to the above table.)
< Manual Operation >
Adjust optional items manually.
(1) Use the MENU buttons on the unit or the DISK PAD on the
remote control to move the green cursor to the number of the
item you wish to adjust.
(2) With the green cursor on the number, use the MENU buttons on
the unit or the DISK PAD on the remote control to raise or lower
the value.
Details of adjustment
Decrease
Dark
Lower
Soft
Less
Red
Moves the picture up or down. Or automatic control.
Moves the picture left or right. Or automatic control.
Decreases the picture flicker. Or automatic control.
Widens of Narrow the horizontal size of the picture. Or automatic control.
for Red
⃝: operation is possible.
VIDEO signal input
Freeze
⃝
Increase
⃝
Bright
⃝
Higher
×
Sharp
×
More
×
Green
×
×
×
×
⃝
for Blue
×: operation is not possible.
Freeze &
Magnify
Magnify
⃝
⃝
⃝
⃝
⃝
⃝
⃝
×
⃝
×
⃝
×
×
×
×
×
⃝
×
×
×
⃝
⃝
17
Advertisement
Table of Contents
