Resolving Software And Hardware Incompatibilities - Dell Inspiron 9300 Owner's Manual

2
Immediately upon seeing the blue bar, press <Ctrl><F11>.
If you do not press <Ctrl><F11> in time, let the computer finish restarting, and then
restart the computer again.
NOTICE:
3
On the next screen that appears, click Restore.
4
On the next screen, click Confirm.
The restore process takes approximately 6–10 minutes to complete.
5
When prompted, click Finish to reboot the computer.
NOTE:
Do not manually shut down the computer. Click Finish and let the computer completely reboot.
6
When prompted, click Yes.
The computer restarts. Because the computer is restored to its original operating state, the
screens that appear, such as the End User License Agreement, are the same ones that
appeared the first time the computer was turned on.
7
Click Next.
The System Restore screen appears and the computer restarts.
8
After the computer restarts, click OK.

Resolving Software and Hardware Incompatibilities

If a device is either not detected during the operating system setup or is detected but incorrectly
configured, you can use the Hardware Troubleshooter to resolve the incompatibility.
To resolve incompatibilities using the Hardware Troubleshooter:
1
Click the Start button and click Help and Support.
2
Type
hardware troubleshooter
3
Click Hardware Troubleshooter in the Search Results list.
In the Hardware Troubleshooter list, click I need to resolve a hardware conflict on my computer,
and click Next.
76
Solving Problems
If you do not want to proceed with PC Restore, click Reboot in the following step.
in the Search field and click the arrow to start the search.