Dell Inspiron 9300 Owner's Manual page 86

3
Turn the computer over, loosen the captive screws on the memory module cover, and then
remove the cover.
NOTICE:
module securing clips.
4
If you are replacing a memory module, remove the existing module:
Use your fingertips to carefully spread apart the securing clips on each end of the memory
a
module connector until the module pops up.
Remove the module from the connector.
b
memory module
NOTICE:
connector labeled "DIMMA" before you install a module in the connector labeled "DIMMB." Insert
memory modules at a 45-degree angle to avoid damaging the connector.
86
Adding and Replacing Parts
To prevent damage to the memory module connector, do not use tools to spread the memory-
If you need to install memory modules in two connectors, install a memory module in the
securing clips
(2 per connector)
notch