Switching Modes - Creative Sound Blaster User Manual

Switching modes

It is recommended that you close
all audio applications before
switching between Digital Only
and Digital/Analog mode.
Dolby Digital 5.1 or DTS pass-
through is only available in
Digital Only mode.
You can switch between Digital Only and Digital/Analog mode using the Digital/Analog switch located
on the side panel of your Sound Blaster. The table below illustrates the different functions between each
mode:
Table 1: Digital/Analog and Digital Only Mode
Connectors/Jacks
Line Out
Line In
Headphones
Mic In
Optical Out
Optical In
Digital/Analog mode
Available
Available
Available
Available
fixed at 48 kHz
32, 44.1 and 48 kHz
Digital Only mode
Not available
Not available
Not available
Not available
44.1 and 48 kHz
32, 44.1 and 48 kHz
About Your Sound Blaster 1-4