Regarding The Indicator Lamps - Hitachi CP-S225 User Manual

WHAT TO DO WHEN YOU THINK A MACHINE DEFECT HAS OCCURRED (continued)

Regarding the Indicator Lamps

Lighting and flashing of the POWER indicator, the LAMP indicator, and the
TEMP indicator have the meanings as described in the Table below.
Please respond in accordance with the instructions within the Table.
POWER LAMP
indicator indicator
The orange Turned OFF
lamp is lighted (Not lighted)
Turned OFF
Fl a shi n g of the green l a mp
Turned OFF
The green lamp is lighted
Turned OFF
Fl a shi n g of the orange l a mp
Blinking of the
-
red lamp
The red lamp
The red lamp
is lighted, or
is lighted
blinks
The red lamp
Blinking of the
is lighted, or
red lamp
blinks
The red lamp
Turned
is lighted, or
OFF
blinks
The red lamp is
Turned
lighted, or
OFF
blinks
Alternative blinking
The green lamp
with the red lamp
is lighted
Simultaneous blinking
The green
with the red lamp
lamp is lighted
NOTE
When the interior portion has become overheated, for safety purposes, the power source is automatically turned OFF, and the
indicator lamps may also be turned OFF. Press the "
minutes. Please then use the unit only after having first confirmed that the unit has sufficiently cooled down.
8
TEMP
indicator
Turned OFF
The STANDBY mode is set
(Not lighted)
Turned OFF The unit is warming up. Please wait.
Turned OFF The unit is in an ON state. Ordinary operations may be performed.
Turned OFF The unit is cooling down. Please wait.
The unit is cooling down. Please wait.
A certain error has been detected. Wait until the POWER indicator lamp has finished
-
flashing, and then perform the proper response measure using the item descriptions
below as reference.
The lamp does not light.
There is a possibility that the interior portion has become heated. Turn the power OFF and wait
Turned
approximately 20 minutes. After the main unit has cooled down, please confirm whether or not
there is blockage of the air passage aperture, whether or not the filter is dirty, and/or whether or
OFF
not the peripheral temperature exceeds 35°C, etc. After performing any needed maintenance,
turn the power ON again; if the same display is displayed, then please change the lamp.
Either there is no lamp and/or lamp cover, or either of these has not been properly fixed
(attached). Turn the power OFF and wait approximately 45 minutes. After the main unit has
Turned
sufficiently cooled down, please make confirmation of the attachment state of the lamp and
OFF
lamp cover. After performing any needed maintenance, turn the power ON again; if the same
display is displayed, then please contact a sales store or a service company.
The cooling fan is not operating. Turn the power OFF and wait approximately 20 minutes. After the
Blinking of the
main unit has cooled down, please make confirmation that no foreign matter has become caught in
the fan, etc. After performing any needed maintenance, turn the power ON again; if the same display
red lamp
is displayed, then please contact a sales store or a service company.
There is a possibility that the interior portion has become heated. Turn the power OFF and wait
approximately 20 minutes. After the main unit has cooled down, please confirm whether or not
The red lamp is
there is blockage of the air passage aperture, whether or not the filter is dirty, and/or whether or
not the peripheral temperature exceeds 35°C, etc. After performing any needed maintenance,
lighted
turn the power ON again; if the same display is displayed, then please contact a sales store or a
service company.
There is a possibility that the interior portion has become overcooled. Please use the unit within
the usage temperature parameters (0°C to 35°C). After performing any needed maintenance,
turn the power ON again; if the same display is displayed, then please contact a sales store or a
service company.
This is a notification that it is time to clean the filter.
After cleaning the filter, operate the FILTER TIME portion of the OPTION Menu, and perform
reset of the FILTER TIME.
○
" (power OFF) side of the main power switch, and wait for approximately 20
Description