Turning On The Power - Hitachi CP-S225 User Manual

TURNING ON THE POWER

Precautions
Connect all devices to be used to the projector prior to turning on the power.
WARNING When the power is ON, a strong light is emitted. Do not look into the
lens.
VIDEO RGB SEARCH
ASPECT AUTO
MAGNIFY
ON
OFF
FREEZE
Control panel
STANDBY/ON INPUT KEYSTONE RESET
NOTE
Turn the
power on/off in
right order.
• Power on the
projector before the
computer or video
tape recorder.
• Power off the
projector after the
computer or video
tape recorder.
14
Make sure that the power cord is firmly and
1
correctly connected to the projector and outlet
STANDBY/ON
BLANK
VOLUME
Turn on the projector's
2
MUTE
power
Set the power switch to [ | ] (ON).
KEYSTONE
The projector will go to STANDBY
mode and the POWER indicator
will light to solid orange.
LANP
TENP
POWER
Press the STANDBY/ON button (control
3
panel or remote control)
• The projector begins warming up and the POWER
indicator blinks green.
• The POWER indicator stops blinking
and lights to solid green once the
projector's power is completely on.
Open the slide lens door
4
The picture is projected.
3
power switch
∼
8 11
POWER indicator
STANDBY/ON