Screen Menu - Hitachi CP-S225 User Manual

SCREEN Menu

With the SCREEN menu, the two items shown in the Table below
can be performed.
Please perform each operation in accordance with the instructions
in the Table.
SCREEN Menu
Item
Selection of BLANK Screen:
The BLANK Screen may be voluntarily selected. The BLANK Screen is
displayed when the screen has been erased (i.e., made to vanish) by
BLANK
manipulating the BLANK button (please refer to the "Temporarily Blanking the
Screen" section of the separate booklet, Vol. 1 (Basic)).
Option screens: Various colored non-patterned (plain) screens displayed
within the Menus.
Selection of START UP Screen:
TURN ON
The START UP Screen may be voluntarily selected. The START UP Screen is
displayed when no signal has been inputted, or when spec signals are being
inputted.
START UP
TURN ON: Existing standard screens. Please make confirmation using the
actual screen(s).
TURN OFF: A non-patterned (plain) blue color screen.
• Note that if TURN OFF is selected the blank screen is displayed in blue when
. . ⇔ .
⇔
TURN OFF
there is no signal.
Description
. ⇔ . .
MENU
MAIN BLANK
PICTURE-1 START UP
PICTURE-2
INPUT
SCREEN
OPTION
: SELECT
Example : SCREEN Menu
(BLANK)
5