Machine Storage - Bissell 86T3 series User Manual

Operations

machine storage

Once your cleaning is complete, make sure both
the dirty and clean water tanks are emptied,
rinsed out and dried before the next use.
notE: Store cleaner in a protected, dry area.
Since this product uses water, it must not be
stored where there is a danger of freezing.
freezing will damage internal components and
void the warranty.
machine care
For best results, a few simple steps can assure
your machine is well maintained after your
cleaning is complete
1. Turn power OFF (0). Unplug the machine and
wrap the power cord.
2. After emptying the clean and dirty water
tanks, rinse them out with running hot tap water.
3. The top half of the dirty water tank can also be
rinsed clean through the nozzle area.
4. To clean attachments, remove from hose and
rinse in clean, running water and let dry. Clean
the hose by removing it from the machine and
let running tap water run through both ends.
5. After carpet is dry, vacuum again to remove
hair and fuzz.
www.bissell.com 800.237.7691
9