Settings Menu - Toshiba Projector Manual

Settings menu

Settings menu
Audio: allows adjustments to Volume of the internal speaker. Adjustments
can also be made from the projector's keypad.
Audio
Sources: allows you to assign a particular input (Computer 1, Video 1, and
Video 2) to a specific source key on the remote and enables or disables Auto-
source. When Autosource is not checked, the projector defaults to the last-
used source. If no source is found, a blank screen displays. When Auto-
source is checked, the projector checks the last-used source first at power
Sources
up. If no signal is present, the projector checks the sources in order until a
source is found or until power down.
Power-up
Source
Power-up Source determines which source the projector checks first for
active video during power-up. When the Autosource feature is On, the pro-
jector automatically finds the active source, checking the Power-up Source
first. The options are Computer 1 for a computer source, and Video 1 (for S-
video connections), and Video 2 (for composite video connections) for video
sources. When this feature is Off, the projector defaults to the source
selected in Power-up Source.
System menu
System: Rear reverses the image so you can project from behind a translu-
Screen Save
cent screen. Ceiling turns the image upside down for ceiling-mounted pro-
jection. Display Messages displays status messages (such as "Searching" or
"Mute") in the lower-left corner of the screen. NND prevents your notebook
computer from going into Screen Save mode. Power Save automatically
turns the lamp off after no signals are detected for 20 minutes. After an
additional 10 minutes with no signal, the projector powers down and can be
toggled off. If an active signal is received before the projector powers down,
the image will be displayed. When Power Save is enabled, Screen Save is
disabled. Screen Save automatically blanks the screen with a black color
after no signals are detected for a preset number of minutes. The image
returns when an active source is detected or a remote or keypad button is
pressed.
32