Internet Access Using P-660Ru-Tx Under Routing Mode - ZyXEL Communications P-660RU-Tx Series Support Notes

Key Settings:
Option Description
Select the correct Encapsulation type that your ISP supports. For
Encapsulation
example, Bridge mode.
When select one encapsulation type, there would be a corresponding
configuration column below, such as Bridge Mode. Select the correct
Bridge Mode
Multiplexing type that your ISP supports. For example, LLC.
(2) Turn off DHCP Server and configure a LAN IP for the P-660RU-Tx in Web
Configurator, Advanced Setup, Interface Setup -> LAN -> DHCP.. We use
192.168.1.1 as the LAN IP for P-660RU-Tx in this case:
Step 1: Disable DHCP Server and save it:
Step 2: Assign an IP to the LAN Interface of P-660RU-Tx, e.g.: 192.168.1.1:

2. Internet Access Using P-660RU-Tx under Routing mode

For most Internet users having multiple computers want to share an Internet
account for Internet access, they have to install an Internet sharing device, like a
router. In this case, we use the P-660RU-Tx which works as a general Router
plus an ADSL Modem.
Set up your workstation
(1) Ethernet connection
Connect the LAN ports of all computers to the LAN Interface of P-660RU-Tx
using Ethernet cable.
All contents copyright © 2010 ZyXEL Communications Corporation.
P-660RU-Tx Series Support Note s
24