Connector Defi Nitions - Supermicro Supero 6016T-6F User Manual

5-9 Connector Defi nitions
Main ATX Power Supply
Connector
The primary power supply connec-
tor (JPW1) meets the SSI EPS 12V
specifi cation. Refer to the table on the
right for the pin defi nitions of the ATX
24-pin power connector. You must
also connect the 8-pin (JPW3/JPW4)
processor power connectors to your
power supply (see below).
Secondary Power Connector
JPW2 must also be connected to the
power supply. See the table on the
right for pin defi nitions.
Secondary Power Connector
JPW3 must also be connected to the
power supply. See the table on the
right for pin defi nitions.
Power Button
The Power On connection is on pins
1 and 2 of JF1. These should be
connected to the chassis power but-
ton. See the table on the right for pin
defi nitions.
Reset Button
The Reset Button connection is
located on pins 3 and 4 of JF1 and
attaches to the reset switch on the
computer chassis. See the table on
the right for pin defi nitions.
Chapter 5: Advanced Serverboard Setup
ATX Power 24-pin Connector
Pin Defi nitions
Pin# Defi nition
13 +3.3V
14 -12V
15 COM
16 PS_ON
17 COM
18 COM
19 COM
20 Res (NC)
21 +5V
22 +5V
23 +5V
24 COM
+12V 8-pin Power
Pin Defi nitions
Pins Defi nition
1 - 4 Ground
5 - 8 +12V
Required Connection
+12V 8-pin Power
Pin Defi nitions
Pins Defi nition
1 - 4 Ground
5 - 8 +12V
Required Connection
Power Button
Pin Defi nitions (JF1)
Pin# Defi nition
1 Power Signal
2 Ground
Reset Button
Pin Defi nitions (JF1)
Pin# Defi nition
3 Reset
4 Ground
5-13
Pin # Defi nition
1 +3.3V
2 +3.3V
3 COM
4 +5V
5 COM
6 +5V
7 COM
8 PWR_OK
9 5VSB
10 +12V
11 +12V
12 +3.3V