Tascam CD-01U Quick Start Manual page 4

Mono output
You can output the analog and digital signals
from the unit in mono.
To enable or disable the mono output function,
use the menu item (menu 08).
MONO
Timer play (Power on play)
The timer play function allows you to
automatically start playback of the unit when an
external timer turns on the unit.
To use the timer play function:
1. Connect a timer between the unit and an AC
outlet.
2. Set the desired CD to the unit.
3. Set the menu item (menu 07) to
TIMER
.
ON
4. Turn off the power using the timer.
When the external timer turns on the unit, it
automatically starts playback.
Pitch control
From the front panel, you can turn on or off the
pitch control function by pressing the
(while the indicator is unlit) and change the
SHIFT
pitch (speed) by rotating the
You can turn on or off the pitch control function
using the key. When on, use the -/+ keys
PITCH
to change the pitch (speed).
The pitch control steps can be selected using the
menu item (menu 12).
PITCH
Key original
The key original function allows you to fix the
pitch when the pitch control function is active.
That is, the pitch control only changes the speed.
To enable or disable the key original function, use
the menu item (menu 01).
KEY-O
TEAC CORPORATION
Phone: +81-422-52-5082
D00882400A
dial
PITCH
dial.
PITCH
3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan
Time display selection
Using the key, you can select the time
DISPLAY
mode on the display from the following:
• Track elapsed time
• Track remaining time (
display)
• Disc remaining time (
the display)
Fade in/out
You can make fade-in or/and fade-out playback.
To set the fade in/out function, use the
menu item (menu 05).
In this menu item, selecting
in setting mode. You can select between 0 to 10
seconds of fade-in time (selecting "0" means the
fade-in function is disabled). Confirming the fade-
in setting automatically enters the fade-out
setting mode. You can set the fade-out time as
with the fade-in time. Confirming the fade-out
setting exits the menu mode.
Eject block
By setting the eject block function to
key is disabled while the unit is playing or
EJECT
paused.
Use the menu item (menu 02) to enable
BLOCK
or disable the eject block function.
Relay play
You can automatically start playback of the unit
immediately after another CD-01U stops
playback, or vice versa.
To enable the relay play function, connect
between the
RELAY IN
the two CD-01U each other using a cable with
mini phone plugs on both ends, and set the
menu item (menu 06) on each unit to
RELAY
.
ON
is lit on the
REMAIN
is lit on
T REMAIN
FADE
enters the fade-
ON
, the
ON
and jacks of
RELAY OUT
Printed in China