Power Windows; Opening And Closing - Mercedes-Benz G 500 Operator's Manual

Controls in detail

Power windows

Opening and closing

The side windows are opened and closed
electrically. The switches for all side
windows are located on the driver's door
control panel. The switches for the respec-
tive side windows are located on the front
passenger door and the rear doors.
1 Override switch ( page 85)
2 Left front window
3 Right front window
4 Right rear window
5 Left rear window
192
Warning!
When closing the windows, make sure there
is no danger of anyone being harmed by the
closing procedure.
Activate the override switch ( page 85)
when children are riding in the back seats of
the vehicle. The children could otherwise
injure themselves, e.g. by becoming trapped
in the window opening.
The closing procedure can be immediately
halted by releasing the switch or by releas-
ing button ‹ on the SmartKey.
When leaving the vehicle, always remove the
SmartKey from starter switch, take it with
you, and lock the vehicle. Do not leave chil-
dren unattended in the vehicle, or with ac-
cess to an unlocked vehicle. Unsupervised
use of vehicle equipment can cause an
accident and/or serious personal injury.
i
You can also open or close the windows
G
using the SmartKey, see "Summer opening fea-
ture" ( page 193) and see "Convenience clos-
ing feature" ( page 194).
Switch on the ignition ( page 39).
Opening the windows
Press switch 2, 3, 4 or 5 to the
resistance point.
The corresponding window will move
downwards until you release the
switch.
Closing the windows
Pull switch 2, 3, 4 or 5 to the
resistance point.
The corresponding window will move
upwards until you release the switch.