Cisco Linksys E800 User Manual page 41

Linksys E800
To check your router status using the browser-based utility:
Status > Router
Status > Local Network
Status > Wireless Network
Status > Ports
1. Log into the browser-based utility (see "How to open the browser-based
utility" on page 25)
2. Click the Status tab, then click the Router page Detailed information
about your router status is displayed (Screen from IPv6-enabled router
shown )
TIP
For field descriptions, click Help on the right side of the screen
Maintaining and Monitoring
3. Click the Status tab, then click the Local Network page Your local
network's IP address information and the DHCP server settings are
displayed (Screen from IPv6-enabled router shown )
4. Click DHCP Client Table to display the currently assigned IP addresses
5. Click the Status tab, then click the Wireless Network page Your wireless
network status is displayed
6. Click the Status tab, then click the Ports page The link status for each of
the Ethernet ports and the Internet port are displayed
38