MSI e GF65M-P4 User Manual page 17

MS-7597
Serial ata Connector: Sata ~ 4
this connector is a high-speed Serial ata interface port. each connector can
connect to one Serial ata device.
iMPoRtant
Please do not fold the Serial ata cable into a 90-degree angle. otherwise, data
loss may occur during transmission.
Fan Power Connectors: CPuFan, SySFan
the fan power connectors support system cooling fan with +2V. When connect-
ing the wire to the connectors, always note that the red wire is the positive and
should be connected to the +2V; the black wire is Ground and should be con-
nected to Gnd. if the mainboard has a System Hardware Monitor chipset on-
board, you must use a specially designed fan with speed sensor to take advantage
of the CPu fan control.
CPuFan SySFan
S/PdiF-out Connector: JSP
this connector is used to connect S/PdiF (Sony & Philips digital interconnect
Format) interface for digital audio transmission.
7