Intel RAID
Intel RAID
■
Reset Dsks to Non-RAID
Select opton 3 Reset Dsks to Non-RAID and press <Enter> to delete the RAID
volume and remove any RAID structures from the drves. The followng screen
appears:
RAID Volumes :
None defined.
Physcal Devces :
Port Devce Model
1
2
Use the <Space> key to select the dsks and press <Enter> key. A confirmaton sen-
tence wll appear below, and then press <Y> key to accept the selecton.
Important
•
You wll lose all data on the RAID drves and any nternal RAID structures when you
perform ths operaton.
•
Possble reasons to "Reset Dsks to Non-RAID" could nclude ssues such as ncom-
patble RAID configuratons or a faled volume or faled dsk.
B-8
[
1.
Create RAID Volume
[
2.
Delete RAID Volume
RESET RAID DATA
Resettng RAID dsk wll remove ts RAID structures
DISK / VOLUME INFORMATION
and revert t to a non-RAID dsk.
[
WARNING : Resettng a dsk causes all data on the dsk to be lost.
(Ths does not apply to Recovery volumes)
Port Drve Model
Seral #
1
XXXX-XXXXXXXX
XXXXXXXXXXXXXX
Seral #
2
XXXX-XXXXXXXX
XXXXXXXXXXXXXX
XXXX-XXXXXXXX
XXXXXXXXXXXXXX
XXXX-XXXXXXXX
XXXXXXXXXXXXXX
Select the dsks that should be reset.
[ ↑↓] - Prevous/ Next
[SPACE] - Selects
[ ↑↓] - Select
[ESC] - Ext
MAIN MENU
]
4.
Recovery Volume Optons
4.
]
Recovery Volume Optons
5.
Ext
]
Sze Status
XXX.XGB Member Dsk
Sze Type/Status (Vol ID)
XXX.XGB Member Dsk
XXX.XGB
Non-RAID Dsk
XXX.XGB
Non-RAID Dsk
[ENTER] - Selecton Complete
[ENTER] - Select Menu