Fan Power Connectors; Front Panel Connectors - MSI H67A-G43 (B3) User Manual

Fan Power Connectors: CPUFAN1,SYSFAN1~4
The fan power connectors support system coolng fan wth +12V. When connectng the
wre to the connectors, always note that the red wre s the postve and should be con-
nected to the +12V; the black wre s Ground and should be connected to GND. If the
manboard has a System Hardware Montor chpset on-board, you must use a specally
desgned fan wth speed sensor to take advantage of the CPU fan control.
CPUFAN1
Important
• Please refer to the recommended CPU fans at processor's offical webste or consult
the vendors for proper CPU coolng fan.
• CPUFAN1 support Smart fan control. You can nstall Control Center utlty that wll
automatcally control the CPUFAN1 speeds accordng to the actual CPUFAN1 tem-
peratures.
Fan cooler set wth 3 or 4 pns power connector are both avalable for CPUFAN1.
•
Front Panel Connectors: JFP1, JFP2
These connectors are for electrcal connecton to the front panel swtches and LEDs.
The JFP1 s complant wth Intel
JFP1
SYSFAN1
Front Panel I/O Connectvty Desgn Gude.
®
SYSFAN2~4
JFP2
MS-7750
2-13