Hardware Setup
5.
Secure the lever near the hook end
under the retenton tab.
7.
Press the four hooks down to fasten
the cooler. Turn over the manboard
to confirm that the clp-ends are cor-
rectly nserted.
Important
•
Confirm f your CPU cooler s firmly nstalled before turnng on your system.
•
Do not touch the CPU socket pns to avod damagng.
•
Whenever CPU s not nstalled, always protect your CPU socket pn wth the plastc
cap covered to avod damagng.
Please refer to the documentaton n the CPU cooler package for more detals about
•
the CPU cooler nstallaton.
•
Read the CPU status n BIOS.
2-6
6.
Make sure the four hooks are n
proper poston before you nstall the
cooler. Algn the holes on the man-
board wth the cooler. Push down the
cooler untl ts four clps get wedged
nto the holes of the manboard.
8.
Fnally, attach the CPU Fan cable to
the CPU fan connector on the man-
board.