Extension Cords; Double Insulated Tools: Tools With Two Prong Plugs - Drill Master 68242 User Manual

Grounding
TO PREVENT ELECTRIC SHOCK AND
DEATH FROM INCORRECT GROUNDING
WIRE CONNECTION: Check with a qualified
electrician if you are in doubt as to whether
the outlet is properly grounded. Do not modify the
power cord plug provided with the tool. Never remove
the grounding prong from the plug. Do not use the tool
if the power cord or plug is damaged. If damaged,
have it repaired by a service facility before use. If the
plug will not fit the outlet, have a proper outlet installed
by a qualified electrician.
Double Insulated Tools:
Tools with Two Prong Plugs
Outlets for 2-Prong Plug
1. Tools marked "Double Insulated" do not require
grounding. They have a special double insulation
system which satisfies OSHA requirements and
complies with the applicable standards of Underwriters
Laboratories, Inc., the Canadian Standard
Association, and the National Electrical Code.
2. Double insulated tools may be used in either of the 120
volt outlets shown in the preceding illustration.
(See Outlets for 2-Prong Plug.)
SKU 68242 For technical questions, please call 1-800-444-3353.

Extension Cords

Note: Extension cords must not be used with this
item's charger.
Symbology
Double Insulated
Canadian Standards Association
Underwriters Laboratories, Inc.
V~
Volts Alternating Current
A
Amperes
WARNING marking concerning Risk
of Eye Injury. Wear ANSI-approved
safety goggles with side shields.
Read the manual before
set-up and/or use.
WARNING marking concerning Risk
of Fire.
Do not cover ventilation ducts.
Keep flammable objects away.
WARNING marking concerning Risk of
Electric Shock.
Properly connect power cord
to appropriate outlet.
Page 5