Drill Master 68986 Owner's Manual page 7

Specifications
Setup - Before use:
Read the EntiRE impORtant SaFEtY inFORmatiOn section
at the beginning of this manual including all text under
subheadings therein before set up or use of this product.
Functions
1/8" Shank with
Buffing Wheel
Collar
accessories
note: Refer to Parts List and Diagram on page 11 for accessory illustrations.
• Use the Diamond Burr Bits (4) to drill
hard, brittle materials, such as tile.
• Use the mounted Stones (5) for
sharpening cutting tools, screwdrivers etc,
deburring metal after cutting, and removing
excess material on metal and ceramics.
• Use the Sanding Drums (6) to smooth
out rough areas on soft materials.
• Use the Cut-off Wheels (7) for cutting,
carving and slotting materials.
• Use the Buffing Wheels (8) for polishing.
SKU 68986 For technical questions, please call 1-800-444-3353.
Tool Input 12VDC
Adapter Input 120V~ / 60Hz
Rotation Speed 16,000 RPM
Collet Size 1mm, 3mm, 3/32", and 1/8"
lock Button
• Use the Wire Wheels (9) to clean
• Use the Whet Stone (10) for sharpening.
• Use the Drill Bits (11) to bore small holes.
• mandrels are the shanks with
power Switch
dirty or rusted surfaces.
a threaded or screw head.
Use them with the cut-off wheels,
polishing wheels, and sanding discs.
The shank without threads on the
end is for the felt polishing wheels.
Page 7