Drill Master 68986 Owner's Manual page 10

user-maintenance instructions
procedures not specifically explained in this manual
must be performed only by a qualified technician.
tO pREVEnt SERiOuS injuRY FROm aCCiDEntal OpERatiOn:
turn the power Switch of the tool to its "OFF" position and unplug the tool from
its electrical outlet before any inspection, maintenance, or cleaning procedures.
tO pREVEnt SERiOuS injuRY FROm tOOl FailuRE:
Do not use damaged equipment. if abnormal noise or vibration
occurs, have the problem corrected before further use.
Cleaning, maintenance, and lubrication
1. BEFORE EaCh uSE, inspect
the general condition of the tool.
Check for loose screws, misalignment
or binding of moving parts, cracked
or broken parts, damaged electrical
wiring, and any other condition that
may affect its safe operation.
plEaSE REaD thE FOllOWinG CaREFullY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST
AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY.
NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION
OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS qUALIFIED
TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS qUALIFIED
TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER
AND/OR DISTRIBUTOR ExPRESSLY STATES THAT ALL REPAIRS AND PARTS
REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED
TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK
AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL
PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF
HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
Page 10 For technical questions, please call 1-800-444-3353.
2. aFtER uSE, clean external surfaces
of the tool with clean, moist cloth.
3. WaRninG! if the supply cord
of this power tool is damaged,
it must be replaced only by a
qualified service technician.
SKU 68986