Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Nady Systems Manuals
  4. Speakers
  5. WA-120
  6. Manual

Nady Systems WA 120 Manual

Ultra portable wireless pa
Hide thumbs Also See for WA 120:

Advertisement

Quick Links

Download this manual See also: Owner's Manual, User Manual
Nady wireless systems are type accepted under
FCC rules parts 90, 74 and 15.
This device complies with RSS-210 of Industry
& Science Canada. Operation is subject to the
following two conditions: (1) this device may not
cause harmful interference and (2) this device
must accept any interference received, including
interference that may cause undesired operation.
NADY SYSTEMS, INC.
Emeryville, CA, USA
www.nady.com
WA 120
ULTRA PORTABLE WIRELESS PA

Advertisement

loading

Related Manuals for Nady Systems WA 120

Summary of Contents for Nady Systems WA 120

  • Page 1 WA 120 Nady wireless systems are type accepted under FCC rules parts 90, 74 and 15. This device complies with RSS-210 of Industry & Science Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.

  • Page 3: Table Of Contents

    Weight: 5.3 lbs. (2.4 Kg.) SERVICE (U.S.) Should your Nady WA 120 require service, please contact the Nady Service Department via phone at (510) 652-2411 or e-mail at service@nady.com for a Return Authorization (R/A) number and a service quote (if out of warranty). Make sure the R/A number is clearly marked on the outside of the package, cashier’s check or money order...

  • Page 4: Introduction

    (8) if the monitored volume is to loud or distorted RECORD OUT, treble and bass controls after adjusting the receiver. • Adjust the volume control of the WA 120 to a comfortable listneing level • Powered externally with provided AC adapter, or internally with either as desired.

  • Page 5: Controls And Connections

    CONTROLS AND CONNECTIONS WLT Bodypack Transmitter Wireless mic receiver antenna Pull out and extend fully for optimum range Power ON/OFF switch Signal input jacks Speaker Power ON LED indicator RF ON LED indicator Indicates reception of transmitter signal Volume controls Tone controls Record out jack Provides signal for recording or additional amplification...
  • Page 6 To preserve battery life, turn the transmitter off when not in use. • The RF ON indicator on the WA 120 should now be lit. • Adjust the volume of the WA 120 to the desired level.

  • Page 7: Operating Instructions For The Nady Wa 120

    Plug the RB-120 into the Battery Power/Recharge Microphones on the same frequency will interfere with each other. jack (17) while the WA 120 is connected to AC power with the provided However, one wireless microphone can be used with two or more AC adapter.
  • Page 8 1. If feedback (howling sound) occurs, try first turning down the treble control (8). If feedback still is present, try turning down the The WA 120 has a port in the rear compartment for charging a single 9V volume (7) or repositioning the WA 120 with respect to the wired battery (13).