Advertisement
Quick Links
Advertisement
Related Manuals for Nady Systems WA-120
Summary of Contents for Nady Systems WA-120
- Page 1 WA-120 Portable Wireless PA OWNER’S MANUAL...
-
Page 3: Table Of Contents
CONTENTS INTRODUCTION ..................2 CONTROLS AND CONNECTIONS ............3 OPERATING INSTRUCTIONS FOR THE NADY WA-120 ....5 WA-120 WIRELESS MICROPHONE RECEIVER OPERATION ...8 WHT HANDHELD MICROPHONE TRANSMITTER ......9 WLT LAVALIER/HEADMIC BODYPACK TRANSMITTER ....9 SPECIFICATIONS ................12 SERVICE ....................12... -
Page 4: Introduction
Thank you for purchasing a Nady WA-120 Wireless Portable P.A.—and congratulations on your choice. The WA-120 is the most affordable and compact of the popular line of Nady wireless P.A.’s. Ideal for many applications, including use in classrooms, conference/meeting rooms, churches, health clubs and small auditoriums, it is powerful, yet lightweight and easily portable. -
Page 5: Controls And Connections
CONTROLS AND CONNECTIONS Wireless mic receiver antenna Pull out and extend fully for optimum range Power ON/OFF switch MIC and AUX signal input jacks ¼” TS (mono) Speaker Power ON LED indicator RF ON LED indicator Indicates reception of transmitter signal Volume controls Tone controls Line/Record out jack Provides signal for recording or additional... - Page 6 11. Storage compartment for AC adapter or optional RB-120 12VDC rechargeable battery 12. Mounting hole for use with optional MST-4B tripod stand 13. Battery-mount for 8 X “D” batteries Used for internal battery operation of unit 14. External DC input jack 15.
-
Page 7: Operating Instructions For The Nady Wa-120
OPERATING INSTRUCTIONS FOR THE NADY WA-120 Powering the WA-120 • External Adapter Plug the external provided AC/DC Adaptor into the External DC input jack (14) socket. Then plug the AC/DC adapter plug into a standard 115VAC or 240VAC outlet (The AC adapter will detect the line voltage automatically). - Page 8 Attention: 1. If feedback (howling sound) occurs, try first turning down the treble control (8). If feedback still is present, try turning down the volume (7) or repositioning the WA-120 with respect to the wired or wireless mic being used. 2. Extend the antenna (1) fully whenever using the wireless micro- phone to ensure optimum performance and maximum range.
- Page 9 Stand Mounting the WA-120 The WA-120 can be mounted on the optional MST-4B aluminum tripod stand for convenient place- ment in a higher position. Contact your dealer or the Nady service department. (See Page 12)
-
Page 10: Wa-120 Wireless Microphone Receiver Operation
WA-120 WIRELESS MICROPHONE RECEIVER OPERATION The WA-120 contains a built-in high quality quartz-locked, fixed frequency VHF wireless receiver precisely matched to the Nady WHT or WLT transmitter supplied; therefore generally no adjustments besides audio volume are required. In high RF activity environment, the MUTE (16) also needs adjusting to eliminate interference. -
Page 11: Wht Handheld Microphone Transmitter
• Adjust the volume of the WA-120 to the desired level. WLT LAVALIER/ HEADMIC BODYPACK TRANSMITTER The Nady WLT is a rugged compact bodypack designed for use with lavalier or headworn mics, and includes these special features: • OFF/STANDBY/ON switch allows convenient audio muting with the transmitter “ON”... - Page 12 WLT Bodypack Transmitter Opening Battery Compartment...
- Page 13 Transmitter Set-up and Operation • Snap open the battery compartment (1) and insert a fresh 9V battery (2), observing the correct polarity. Close the compartment. • The WLT is provided with a 3.5 mm locking jack (3) for connecting themicrophone. Plug in either the Lavalier/Lapel (4) or the Headworn microphone (5), as supplied.
-
Page 14: Specifications
SERVICE (U.S.) Should your Nady WA-120 require service, please contact the Nady Service Department via phone at (510) 652-2411 or e-mail at service@nady.com for a Return Authorization (R/A) number and a service quote (if out of warranty). Make sure the R/A number is clearly marked on the outside of the package, cashier’s check or money order... - Page 15 Nady Systems, Inc. for repair. The warranty is null and void if any Nady serial number has been removed or defaced.
- Page 16 Nady wireless systems are type accepted under FCC rules parts 90, 74 and 15. This device complies with RSS-210 of Industry & Science Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.