SYSTEM FEATURES ......................4 PSS-300 INSTALLATION ....................5 FRONT PANEL CONTROLS & CONNECTIONS .............. 8 FRONT PANEL CONTROLS & CONNECTIONS .............. 6 SPECIFICATIONS ......................10 SERVICE INFORMATION ....................10 WARRANTY ........................11 Nady Systems Inc. – PSS-300 Portable Sound System...
Thanks for selecting NADY AUDIO as your choice in portable sound systems. USING THIS MANUAL This booklet provides information regarding the use of the PSS-300 portable sound system. It includes detailed instructions, description of features and step-by-step guides to operating. This should answer any questions about the operation and servicing of this system.
The product has been dropped, or the enclosure damaged. Do not attempt to service the product beyond what is described in the user maintenance instructions. All other servicing should be referred to qualified service personnel. Nady Systems Inc. – PSS-300 Portable Sound System...
• Warranty Card 2. SETUP After transporting the PSS-300 to the desired location, stand the unit upright so that the feet of the speaker are down on an even surface. Unscrew and carefully remove the ampli- fier from the back of the speaker if desired and place on a flat surface. Unscrew the acces- sory panel of the 2nd speaker to retrieve the included speaker and power cables.
Right speakers. Connect the other end of each cable to the corresponding Left and Right speaker outputs on the rear panel of the PSS-300 mixer section. Position the length of the cables so they will not be a safety hazard to people.
13. SPEAKER OUT - The PSS-300 has two ¼” TS connectors, which are powered outputs used to connect your left and right speakers. Use the included speaker cables to connect the speakers CAUTION: The total impediance load for each side of the amplifier must not be less than 6 Ohms.
Page 9
FRONT PANEL CONTROLS & CONNECTIONS 12 11 n a dy. c om...
21.1 lbs (9.53 kg) assembled SERVICE (U.S.) Should your Nady PSS-300 require either warranty or non-warranty service, please contact the Nady Service Department via phone at (510) 652-2411 or e-mail at service@ nady.com for a Return Authoriza tion (R/A) number and a service quote (if out of warranty).
If any such defect is discovered within the warranty period, Nady Systems, Inc. will repair or replace the unit free of charge, subject to verification of the defect or malfunction upon return to Nady Systems.