Download Print this page

Nady Systems WA-120 User Manual

Ultra portable wireless pa
Hide thumbs Also See for WA-120:

Advertisement

Quick Links

Nady wireless systems are type accepted under
FCC rules parts 90, 74 and 15.
This device complies with RSS-210 of Industry
& Science Canada. Operation is subject to the
following two conditions: (1) this device may not
cause harmful interference and (2) this device
must accept any interference received, including
interference that may cause undesired operation.
NADY SYSTEMS, INC.
Emeryville, CA, USA
www.nady.com
WA 120
ULTRA PORTABLE WIRELESS PA

Advertisement

loading

Summary of Contents for Nady Systems WA-120

  • Page 1 Nady wireless systems are type accepted under FCC rules parts 90, 74 and 15. This device complies with RSS-210 of Industry & Science Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 3: Table Of Contents

    Weight: 5.3 lbs. (2.4 Kg.) SERVICE (U.S.) Should your Nady WA 120 require service, please contact the Nady Service Department via phone at (510) 652-2411 or e-mail at service@nady.com for a Return Authorization (R/A) number and a service quote (if out of warranty). Make sure the R/A number is clearly marked on the outside of the package, cashier’s check or money order...
  • Page 4: Introduction

    Thank you for purchasing a Nady WA 120 Wireless Portable P.A.—and congratulations on your choice. The WA 120 is the most affordable and compact of the popular line of Nady wireless P.A.’s. Ideal for many applications, including use in classrooms, conference/meeting rooms, churches, health clubs and small auditoriums, it is powerful, yet lightweight and easily portable.
  • Page 5: Controls And Connections

    WLT Bodypack Transmitter CONTROLS AND CONNECTIONS Wireless mic receiver antenna Pull out and extend fully for optimum range Power ON/OFF switch Signal input jacks Speaker Power ON LED indicator RF ON LED indicator Indicates reception of transmitter signal Volume controls Tone controls Record out jack Provides signal for recording or additional amplification...
  • Page 6 • The RF ON indicator on the WA 120 should now be lit. • Adjust the volume of the WA 120 to the desired level. The Nady WLT is a rugged compact bodypack designed for use with lavalier or headworn mics, and includes these special features: •...
  • Page 7: Operating Instructions For The Nady Wa 120

    WA 120 WIRELESS MICROPHONE RECEIVER OPERATION The WA 120 contains a built-in high quality quartz-locked, fixed frequency VHF wireless receiver precisely matched to the Nady WHT or WLT transmitter supplied; therefore no adjustments besides audio volume are required. • After the amplifier has been turned on by the main power switch (2), turn the wireless receiver’s MIC/TS volume control (7) slightly...
  • Page 8 Stand Mounting the WA 120 The WA 120 can be mounted on the optional MST-4B aluminum tripod stand for convenient place- ment in a higher position. Contact your dealer or the Nady service department. (See Page 12) POWER AMPLIFIER PORTABLE RECORDER PORTABLE CASSETTE...