Troubleshooting - Monster Power PRO 3600 Owner's Manual

Symptom
The PRO 3600 PowerCenter is
not receiving power.

TROUBLESHOOTING

Possible Cause
The PRO 3600 PowerCenter
is not turned On.
Too many devices are
connected, causing an
overload, tripping the
Thermal Circuit Breaker.
Remedy
• Turn the PRO 3600 PowerCenter switch on.
• Make sure the PRO 3600 PowerCenter's
AC power plug is plugged into a properly
grounded 120 volts (nominal) wall outlet.
• In some households, a wall switch may need
to be thrown to make the wall plug active.
Try turning on the light switches located
near the wall unit.
• Press the PRO 3600 PowerCenter Thermal
Circuit Breaker button in to reset.
Please allow 10 minutes before attempting
to reset. If you reset too soon, the breaker
will prematurely sense power overload
and not allow unit to operate.
• If the Circuit Breaker continues to trip,
try moving one or more components
to another PRO 3600 PowerCenter.
You may be drawing too much current
through one PRO 3600 PowerCenter.
17