Troubleshooting - Monster Power PowerCenter HTS1000 Owner's Manual

PROBLEM – The PowerCenter is not receiving power.
Possible Cause #1
The PowerCenter is not turned On.
Possible Solutions
• Turn the PowerCenter switch On.
• Make sure the PowerCenter's AC power plug is plugged into a properly grounded
120V wall outlet.
• In some households, a wall switch may need to be thrown to make the wall plug come alive.
Try turning on the light switches located near the wall unit powering the PowerCenter.
Possible Cause #2
Too many devices are connected, causing an overload, throwing the Thermal Circuit Breaker.
Possible Solutions
• Press the PowerCenter Thermal Circuit Breaker button in to reset. Please allow 10 minutes
from the time the Circuit Breaker is initially thrown before attempting to reset. If you reset
too soon, the breaker will prematurely sense power overload and not allow unit to operate.

TROUBLESHOOTING

20