Configuring Security - Intermec CK31 User Manual

Configuring Security

CK31 Handheld Computer User's Manual
Host
Serial cable
CK31
CK31 in a Serial Network
To use serial communications with your CK31
1 Turn off the CK31.
2 Connect the CK31 to the serial port of another device. You
can do this in one of the following ways:
• Connect the CK31 serial port to a button link or serial
printer using the 26-pin to DB9 (9-pin) serial adapter and
a male-to-female null modem RS-232 cable.
• Connect the AD1 communications dock to the serial port
of the other device using a DB9 to DB9 serial adapter
cable. Insert the CK31 into the dock.
3 Turn on the CK31.
4 Make sure that your CK31 is communicating with the
network and that the network can see your CK31.
The CK31 provides four types of security for your wireless
network:
• Wi-Fi Protected Access (WPA)
Chapter 2 — Configuring the CK31
Ethernet
PC
59