Configuring The Ck31 With Setup Assistant - Intermec CK31 User Manual

Configuring the CK31 With Setup Assistant

CK31 Handheld Computer User's Manual
When first setting up the CK31, use Setup Assistant to set or
enable basic network parameters and connect your CK31 to the
network. Setup Assistant guides you through setting the
following basic network parameters:
• Date and time (including time zone)
• 802.11 radio
• WEP security
• DHCP server or IP address, subnet mask, and default router
• Device name
To set other parameters, use the Intermec Settings or another
configuration method. The Setup Assistant runs on the CK31
the first time you turn on the computer.
The Setup Assistant Start Screen
After you complete the Setup Assistant, the CK31 should be
communicating with your network. A network connection icon
appears in your taskbar. For more information on the network
icons, see "Understanding the Screen Icons" on page 17. For
detailed information on most of the commands available in
Intermec Settings, see the Intermec Computer Command
Reference Manual (P/N 073529).
Chapter 2 — Configuring the CK31
39