Exiting Intermec Settings - Intermec CK31 User Manual

CK31 Handheld Computer User's Manual
4 Tap OK. The CK31 erases the registry and then performs a
cold boot. When the CK31 is done booting, the calibration
screen appears.
5 Follow the instructions on the screen to calibrate your stylus.
When you are done calibrating your stylus, the Setup
Assistant appears.
Note: You may need to reinstall some applications after
restoring the default settings because any settings that were
modified for your application will be reset.

Exiting Intermec Settings

When you are done modifying your device configuration and
saving your settings, exit Intermec Settings.
To exit Intermec Settings
• From the Main Menu choose File > Exit.
or
• Tap the X in the upper right corner of the window.
If you try to exit Intermec Settings without saving your changes,
a message box appears asking if you want to save your
configuration changes. Tap Yes.
Chapter 2 — Configuring the CK31
43