Screen Resolutions; Temperature And System Monitoring - Fujitsu D2779 Technical Manual

Screen resolutions

3.4 Screen resolutions
Depending on the operating system in use, the screen resolutions specified
below apply to the internal graphics controller.
Screen resolution
1600 x 1200
1280 x 1024
1152 x 864
1024 x 768
800 x 600
640 x 480
3.5

Temperature and system monitoring

Temperature and system monitoring aims to reliably protect the hardware from
overheating and to provide information on the system state. It also prevents
unnecessary noise by reducing the fan speed.
Temperature and system monitoring is controlled by an onboard Base
Management Controller (BMC) that supports the following functions:
Temperature monitoring
Measuring the processor temperature by way of a temperature sensor.
Measuring the ambient temperature with an onboard temperature sensor.
Measuring the temperature with the Super I/O chip.
Fan monitoring
The fans are monitored. Fans that are blocked, sluggish or no longer available
are detected. The BMC supports two fan interfaces.
Fan control
The fans are controlled according to temperature. Maximum speed will only be
achieved when switching on the server and in case of a fan test.
24
Refresh rate (Hz)
75
120/75
160/100
200/120
200
200
Technical Manual
No. of bits per pixel
16 bpp
16 bpp/32 bpp
16 bpp/32 bpp
16 bpp/32 bpp
32 bpp
32 bpp
D2779 (TX100 S2)
Features