Supported Screen Resolutions; Temperature And System Monitoring - Fujitsu D2861 Tehnical Manual

Supported screen resolutions

3.3 Supported screen resolutions
Depending on the operating system used, the following screen resolutions
apply for the graphics controller on the system board. The graphics controller is
integrated in the iRMC S2 (integrated Remote Management Controller).
Screen resolution
640 x 480 Hz
800 x 600 Hz
1024 x 768 Hz
1152 x 864 Hz
1280 x 1024 Hz
1600 x 1200 Hz
If you are using a different graphics controller, you will find a list of supported
screen resolutions in the documentation for the graphics controller.
3.4

Temperature and system monitoring

One objective of temperature and system monitoring is to reliably protect the
computer hardware from damage in the event of overheating. It is also designed
to prevent unnecessary noise generation by reducing the fan speed, and to
provide information about the status of the system.
The temperature and system monitoring are controlled by the iRMC S2
(integrated Remote Management Controller).
The following functions are supported:
Temperature monitoring
Measurement of processor temperature and the internal system temperature by
an onboard temperature sensor, measurement of ambient temperature by an
2
I C temperature sensor.
Fan control
The fans are regulated according to the temperature.
30
Maximum color
depth
32 Bit
32 Bit
32 Bit
16 Bit
24 Bit
16 Bit
Technical Manual
Performance features
Maximum frequency
85 Hz
85 Hz
75 Hz
60 Hz
60 Hz
60 Hz
D2861 (BX922 S2)