Screen Resolution; Temperature / System Monitoring - Fujitsu D2671 Technical Manual

For rx200 s4
Table of Contents

Advertisement

Screen resolution

3.4
Screen resolution
Depending on the operating system used the screen resolutions in the following
table refer to the screen controller on the system board. If you are using an
external screen controller, you will find details of supported screen resolutions
in the operating manual or technical manual supplied with the controller.
Screen resolution
640x480
800x600
1024x768
1152x864
1280x1024
1600x1200
3.5

Temperature / system monitoring

Temperature and system monitoring aim to reliably protect the computer
hardware against damage caused by overheating. In addition, any unnecessary
noise is also prevented by reducing the fan speed, and information is provided
about the system status.
The temperature and system monitoring are controlled by the iRMC controller
(integrated Remote Management Controller).
The following functions are supported:
Temperature monitoring
Measurement of the processor temperature, measurement of the ambient
temperature by a temperature sensor on the LED board.
Fan monitoring
Fans that are no longer available, blocked or sticky fans are detected.
Fan control
The fans are regulated according to temperature.
20
Refresh rate (Hz)
85
85
85
75
60
65
Technical Manual
Max. number of colours
32 bit
32 bit
32 bit
24 bit
24 bit
16 bit
D2671 (RX200 S4)
Features

Advertisement

Table of Contents
loading

Table of Contents