Table of Contents
Advertisement
Making the sound setup using the Setup menu
Reproducing audio with sound
properties close to the original
(SPRM: Supreme)
When the played audio fi le lacks high frequencies
due to compression used in recording, this function
optimizes the reproduced audio using Kenwood-
original technology.
•
SPRM is valid in playback of SD1, SD2 and USB.
1
Select "SPRM".
Press [MULTI CONTROL A/B]
to select, then press [ENTER].
"SPRM" lights when "ON"
is selected.
2
Select ON/OFF.
Press [MULTI CONTROL A/B]
to select, then press [ENTER].
•
With the remote control unit, this function can be set
with the CD, SD and USB audio sources.
To set using [SPRM] of the remote control unit
Press [SPRM].
Each press switches ON/OFF.
98
K-511USB/RD-K511USB
Playing best-fi t sound according
to genre (BestFit EQ EX)
This function reproduces the optimum sound
according to the genre of music.
1
Select "BestFit EQ EX".
Press [MULTI CONTROL A/B]
to select, then press [ENTER].
"
" lights when ON is
selected.
2
Select one of the preset modes.
Press [MULTI CONTROL A/B].
Each press switches the selection.
BestFit EQ EX is
OFF
canceled.
Vocal High
Vocal Low
Radio mode
3
Enter the selection.
Press [ENTER].
•
Pressing [FLAT] ends the BestFit EQ EX setting after
saving the last condition. Pressing [FLAT] again resets it
to the original setting.
To set using [BEST FIT EQ EX] of the remote control unit:
Press [BEST FIT EQ EX].
Each press switches the preset mode.
Playback with high sound
quality
(HR SOUND)
This is Kenwood-original sound quality
improvement technology, which is capable of
reproducing the CD audio with lower distortion as
well as audio fi les.
1
Select "HR SOUND".
Press [MULTI CONTROL A/B]
to select, then press [ENTER].
"SPRM" lights when "ON"
is selected.
2
Select ON/OFF.
Press [MULTI CONTROL A/B]
to select, then press [ENTER].
Setting the left and right
speaker balance (BALANCE)
Adjust the balance of volume between the left and
right speakers.
1
Select "BALANCE".
Press [MULTI CONTROL A/B]
to select, then press [ENTER].
2
Adjust the balance position.
Press [MULTI CONTROL C/D].
3
Enter the selection.
Press [ENTER].
Resetting the adjusted
frequency characteristics to the
original sound (FLAT)
All of the adjustments set with D-BASS, TONE,
MANUAL EQ, SPRM and BestFit EQ EX can be reset
to the fl at condition to reproduce the original
sound as it is.
1
Press [FLAT].
Press [FLAT].
Each press switches ON/OFF.
When ON is selected,
lighted indicators such as
"TONE" and "D-BASS" are
turned off .
•
If the D-BASS, TONE, MANUAL EQ, SPRM and BestFit EQ EX
settings are not adjusted after FLAT is set to ON, pressing
FLAT again to OFF recalls their previous settings.
English
99
Hide quick links:
Advertisement
Table of Contents
