Making the recording setup using the Setup menu
Setting the recording input
(REC INPUT)
When recording a CD in SD/USB, this item is used
to select whether digital recording is performed to
record the digital output signal or analog recording
is performed to record the analog output signal.
1
Select "REC INPUT".
Press [MULTI CONTROL A/B]
to select, then press [ENTER].
2
Select the recording input.
Press [MULTI CONTROL A/B].
Each press switches the selection.
Digital recording
DIGITAL
Analog recording
ANALOG
3
Enter the selection.
Press [ENTER].
•
When a digital copy-controlled CD is recorded, the REC
INPUT is switched automatically to "ANALOG".
88
K-511USB/RD-K511USB
Setting the recording level
(REC LEVEL)
If the audio recorded in the component connected
to the [
USB]/[REC IN] terminal or in the SD
card is distorted or its level is too low, adjust the
recording level.
1
Select "REC LEVEL".
Press [MULTI CONTROL A/B]
to select, then press [ENTER].
2
Select the audio source you want to
change the recording level.
Press [MULTI CONTROL A/B].
Each press switches the selection.
Setting of SD1/SD2/USB
SD1/SD2/USB
Setting of [REC OUT]
REC OUT
The display returns to
RETURN
the "REC SETUP" display.
3
Enter the selection of audio source.
Press [ENTER].
4
Adjust the recording level.
Press [MULTI CONTROL A/B].
SD1/SD2/USB
The recording level can be adjusted as desired in
the range between "−2" and "+2".
Example) When REC
LEVEL is set to "+2"
REC OUT
Select "HIGH" or "LOW" as desired.
Example) When REC
LEVEL is set to "HIGH"
5
Enter the selection.
Press [ENTER].
Setting the fi le division method
(AUTO DIVIDE)
When recording radio broadcasting, etc. in SD/USB,
this item is used to set whether the fi le is divided
automatically or manually.
1
Select "AUTO DIVIDE".
Press [MULTI CONTROL A/B]
to select, then press [ENTER].
2
Select the division method.
Press [MULTI CONTROL A/B].
Each press switches the selection.
Manual fi le division.
OFF
Automatic fi le division.
ON
3
Enter the selection.
Press [ENTER].
4
Divide the fi le.
When OFF is selected
When the point you want to divide comes during
recording,
Press [ENTER].
Each press creates a new fi le.
When ON is selected
Set the interval for fi le division in minute. For
details, see "Dividing fi les automatically (DIVIDE
TIME)". (page 90)
•
When recording from radio broadcasting, the fi le is
divided at the intervals set with DIVIDE TIME. (page 90)
•
When recording from a component connected to
iPod/D.AUDIO or AUX, the fi le is divided every time a no-
sound condition has lasted for 3 seconds or more.
English
89