Resetting The Adjusted Sound To The Original Sound (Flat) - Kenwood K-323-R Instruction Manual

■
When "BASS" or "TREBLE" is selected:
Press [G]/[H].
The level can be adjusted in the increment/
decrement of 1.
BASS +6
BASS 0
BASS -6
" " lights when the BASS or TREBLE tone is
set.
■
When "Surr Sens" is selected:
Press [G]/[H].
Each press switches the DTS surround eff ect in the
following order.
DTS OFF
DTS ON : 1
DTS ON : 2
" " lights when DTS Surround Sensation is
set.
3
Enter the selection.
Press [ENTER].
• It is not possible to adjust the tone (BASS/TREBLE), DTS
Surround Sensation (
• The DTS Surround Sensation (
when headphones are connected. Disconnecting the
headphones resumes the previous eff ect.
To increase
To decrease
Surround is OFF.
Surround is ON.
Surround eff ect is enhanced
further.
) and D-BASS simultaneously.
) eff ect is cancelled
31
Resetting the adjusted sound to
the original sound (FLAT)
The results of the D-BASS and TONE adjustments
can be cancelled to fl at levels so that the original
sound is reproduced.
1
Select FLAT.
Press [FLAT].
Each press switches FLAT/UNDO alternately.
When FLAT is selected, the "D-BASS", "TONE" and
" " settings are cancelled and their indicators
extinguished.
• Pressing [FLAT] cancels the low frequency
enhancement (D-BASS), tone adjustments (TONE)
and DTS Surround Sensation eff ect (
it again returns the low frequency enhancement,
tone adjustments and DTS Surround Sensation to the
previous settings.
). Pressing
English