Hunter 44668 Manual page 4

How to unistall old tHermostat and install new Hunter tHermostat
Next you will need to insert the rest of the wires into
the terminals with the appropriately marked wires:
The "RC" labelled wire will go into the "RC" terminal.
Tighten the screw securely.
The "Y/O" labelled wire will go into the "Y/O"
terminal. Tighten the screw securely.
The "W/B" labelled wire will go into the "W/B"
terminal. Tighten the screw securely.
©2009 Hunter Fan Company
The "G" labelled wire will go into the "G" terminal.
Tighten the screw securely.
9. You are now ready to install the body of the the
thermostat onto the base. Place the top of the
thermostat onto the top tabs of the mounting base
and snap into place.
44668 tHermostat
43091-01 • 03/20/2009
3