Sanyo SAP-K18AM Instruction Manual page 14

4. OPERATION OF WIRELESS REMOTE CONTROL UNIT
4.5 Using the SLEEP Operation
4.5.1 In Cooling and DRY
Mode : ( and
4.5.2 In Heating Mode: ( )
Operation and Maintenance
SLEEP Mode is used for saving energy.
Press the SLEEP button while operation.
The mark appears in the display.
To release the SLEEP function, press the SLEEP button
again.
When the SLEEP mode is selected, the air conditioner
)
automatically rases the temperature setting 1 °C when 60
minutes have passed after the selection was made, and then
another 1 °C after another 60 minutes have passed,
regardless of the indoor temperature when SLEEP was
selected. Afterwards, the unit will remain this temperature.
This enables you to save energy without sacrificing comfort.
This function is convenient when gentle cooling is needed.
Setting
temperature
When the SLEEP mode is selected, the air conditioner
automatically lowers the temperature setting 1°C when 60
minutes have passed after the selection was made, and then
another 1°C after another 60 minutes have passed,
regardless of the indoor temperature when SLEEP was
selected. Afterwards, the unit will remain this temperature.
This enables you to save energy without sacrificing comfort.
This function is convenient when gentle heating is needed.
Setting
temperature
1 °C
1 °C
Press the 60 min.
SLEEP button
Press the 60 min.
SLEEP button
60 min. Time
1 °C
1 °C
60 min. Time
12