Long Range Wireless Access Point / Client Bridge
6.3 System
6.3.1 System Properties
Click on the System Properties link under the System drop‐down menu. This
page allows you to switch the operating mode of the device, as well as specify a
name and select the operating region.
Device Name: Specify a name for the device (this is not the SSID),
Country/Region: Select a country from the drop‐down list.
Operating Mode: Select and operating mode. Configuration for each operating
mode is described in their respective chapters.
Click on the Apply button to save the changes.
6.4 Router
Click on the System link on the navigation
drop‐down menu. You will then see System
Properties setting, which is described below.
Click on the Router link on the navigation
drop‐down menu. You will then see three
options: WAN settings, LAN settings, and
VPN Pass Through. Each section is
described in detail below.
Version 1.0
46