Long Range Wireless Access Point / Client Bridge
Send SNMP Trap: Specify the IP address of the computer that will receive the
SNMP traps.
Trap Community Name: Specify the password for the SNMP trap community.
Click on the Apply button to save the changes.
5.5.3 Backup/Restore settings, Reset to factory default settings
Click on the Backup/Restore Setting link under the Management menu. This
option is used to save the current settings of the device in a file on your local disk
or load settings on to the device from a local disk. This feature is very handy for
administrators who have several devices that need to be configured with the
same settings.
Save a copy of the current settings: Click on the Backup button to save the
current configuration.
Restore saved settings from a file: Once a file has been backed up, you may
restore it by clicking on the Browse button to select the file, and then the
Restore button.
Revert to factory default settings: Click on the Factory Default Settings button to
reset the device to the default settings. Please wait while the device restart and
then access the device using the default IP address: 192.168.1.1
Version 1.0
39