6 Client Router Operating Mode
6.1 Logging In
To configure the device through the web‐browser, enter the IP address of the
device (default: 192.168.1.1) into the address bar of the web‐browser and press
Enter.
Make sure that the device and your computers are configured on the same
subnet. Refer to Chapter 2 in order to configure the IP address of your computer.
After connecting to the IP address, the web‐browser will display the login page.
Specify admin for both the user name and password.
After logging in you will graphical user interface (GUI) of the device. The
navigation drop‐down menu on left is divided into four sections:
1.
Status: Displays the overall status, connection status, and event log.
2.
System: This menu includes the system properties, IP and Spanning Tree
settings.
3.
Router: This includes WAN, LAN, and VPN settings.
4.
Wireless: This menu includes status, basic, advanced, and security.
5.
Management: This menu includes the admin setup, SNMP, firmware upgrade,
and save/restore backup.