Table of Contents
Advertisement
Setup
14. Select the Test button
response of the device to this command.
15. Use the CURSOR PAD
NEXT, then press the SELECT button to move on to
the next SETUP screen.
16. Use the CURSOR PAD
that connects to the video and audio output of the
DVD.
17. Use the CURSOR PAD
NEXT, then press the SELECT button to move on to
the next SETUP screen.
18. Confirm all settings, then press the SELECT button to
move on to the next SETUP screen.
19. Continue with the normal procedures to setup TV
Input, Monitor Out, Optical Out and the labeling of
the source buttons.
20. Select "YES" to setup another device or select "No
thanks, I'm done" to exit the AV NET setup.
NOTE: 1. After a successful A/V NET setup to a chosen TV Input, the user can access soft key controls by
selecting the device in the inputs menu.
2. Each Device and Custom setting only accepts one device at a time. The second device/custom
setup will give the user the options to either modify or delete the device.
3. When setting up devices that have Monitor Out options (examples: A/V receiver, VCR), the Monitor
Out and Audio Out will have default settings of TV Tuner out and Fixed respectively.
4. Before changing or modifying the Video and Audio Inputs, both should be set to "Not Connected"
to access available options.
5. The device label will show on the Inputs menu until deleted or modified.
6. The AV NET setup will have priority over the Input setup.
"Play button" to check the
,
,
and
to highlight
or
to select the TV Input
,
,
and
to highlight
AV Net Setup Wizard : Device Settings
DVD3 Settings
Brand Name
Custom
IR Code Set
Custom
Transmission Test
Test Button
POWER
CH
Back
Move
IR Out
SEL
AV Net Setup Wizard : Device Settings
DVD3 Settings
Brand Name
Custom
IR Code Set
Custom
Inputs settings
Video Input
Not Connected
Audio Input
Not Connected
Back
Move
Change Source
SEL
Select
AV Net Setup Wizard : Device Settings
DVD3 Settings
Brand Name
Custom
IR Code Set
Custom
Video Input
Not Connected
Audio Input
Not Connected
All settings are complete!
Back
Move
Select
SEL
AV Net Setup Wizard : Device Settings
Congratulations!
Your DVD3 is now
connected to your AV network.
Would you like to setup another device?
No thanks, I'm done.
Yes
Move
SEL
Select
Next
Next
Next
67
Hide quick links:
Advertisement
Table of Contents
